3/4" & 1" Inch Deep Trough Tank Quick Stop Floating Valve (Armless Ball Cock)
float valve (also balltap or ballcock ) is a mechanism or machine for filling water tanks,
such as those found in flush toilets, while avoiding overflow and (in the event of low water
pressure) backflow.
A Float detects changes of elevation in the liquid free surface and opens or closes a valve accordingly. Large numbers of small Float valves are used in domestic water systems. A Float valve maintains the level in the cold water header tank which regulates the pressure of the hot water system.
| Valve body | ABS plastic |
| Stem | ABS Plastic |
| Plug | NR |
| Float ball | PE |
| Rod | ABS Plastic |
| Working Water Pressure | 0.1-1.2mpa |
| Working Temp | - 35 C to + 70 C |
Advantages :
This ball cock adopts the autolock theory to fasten the water flow rate, less control strength need for switching water, its max water pressure can be 1.2Mpa, mainly installed in home use water tank, livestock and cooling tower etc. And we are very pleased to provide samples for customers to test.
Trough Tank Quick Stop Floating Valve are usually used in some big and deep water containers. It can be used in water tower, livestock farm and so on. It has two ways to install: level and vertical, which are also called horizontal type and vertical type. As there are two holes at the head of valve body. you can put the line through different holes to achieve horizontal or vertical installation. And the other end of line tied to the hole of float ball.
Working principle:
1. As the water fill in water tank, the floats rise and up to the settled water level, then the valve will be closed by the line pulling force.
2. As the water level drop, tension will reduces between floats and valve body, then the spring which in the valve body forces the valve open, and the water fill in tank again at this time.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation.
Each of install method will not affect the performance.
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
Product Tags:
|
|
1" Inch Water Tank Float Valve Quick Stop Armless Ball Cock Images
|
